PCB Details (All values are in mm)
Specification
Value
Maximum no. of layers
2
Board Type
Single PCB / Customer Panel
Maximum board size (L x W)
260 x 415
Maximum FPC thickness
0.18
Minimum FPC thickness
0.06
Base Material
Specification
Value
Base Material
Polyimide
Outer Layer Finished Copper (All values are in oz)
Specification
Value
*Max Cu Wt.
35
*Min Cu Wt.
12
Circuit Layers (All capabilities in mm)
Specification
Value
Minimum track width
0.10
Minimum Spacing
0.10
Drilling (All values are in mm)
Specification
Value
Minimum finished via hole size (End dia)
0.10
Minimum finished via pad size
0.40
Minimum annular ring
0.10
Drill to drill clearance
0.15
Minimum slot size for PTH slots (Tool size)
0.50
Minimum slot size for NPTH slots (Tool size)
0.50
Counter sunk (NPTH)
6.00/6.50/7.00/7.50 tool diameter
Drilling Minimum hole Size Tolerance (All values are in mm)
Specification
Value
PTH Hole size
3.5
+/- 0.10
NPTH Hole size
3.0
+/- 0.15
NPTH Hole size
3.0
+/- 0.10
PTH Hole size
3.5
+/- 0.15
Surface Finish (All values are in micron)
Specification
Value
Remark
Electrolytic Gold (Gold tabs)
Yes
Nickle : 3 to 5
Gold : 0.3 to 0.50
Electroless Nickle / Gold
Yes
Nickle : 3 to 5
Gold : 0.05 to 0.075
Immersion Tin
Yes
Controlled Impedance Measurement (All values are in ohm)
Specification
Value
Remark
Controlled Impedance measurement
Yes- (25 to 120)
As per requirement
Electroless Nickle / Gold
Yes
Nickle : 3 to 5
Gold : 0.05 to 0.075
Immersion Tin
Yes
PCB Thickness Tolerance (All values are in mm)
Specification
Value
PCB Thickness Tolerance
0.05
Coverlay
Specification
Value
Coverlay
Yellow coverlay - Without / Top / Bottom / Both sides
Legend (All values are in mm)
Specification
Value
Legend
White
Legend line width
0.10
Minimum character height
1.00
Copper Clearance from PCB edge (All values are in mm)
Specification
Value
For outer layers
0.20
Routing (All values are in mm)
Specification
Value
Minimum router size
0.50
Scoring
Specification
Value
Scoring
Not possible
Carbon (All values are in mm)
Specification
Value
Minimum line width
0.30
Minimum carbon – carbon spacing
0.25
Peelable (All values are in mm)
Specification
Value
Minimum width of any Peel-off element
0.50
Maximum coverable hole ENDSIZE
6.00
Minimum overlap on copper pattern
0.254
Minimum clearance to free copper
0.254
Minimum distance from PCB outline
0.50
Serialization
Specification
Value
Serialization
Yes for single pcb
Hatch Pattern (All values are in mm)
Specification
Value
Hatch Pattern
Track Width : 0.15, Track to Track : 0.15
Stiffener
Specification
Value
Material
FR-4 / Polyimide- Without / Top / Bottom / Both sides
Surface finish
ENIG / Immersion Tin
Finish Copper
12 micron / 35 micron